Enclosed cabinet, single-piece installation
All equipment is housed in a steel cabinet on an aluminium profile frame. A touchscreen, manometers and pressure gauges sit on the front, with the electrical and control panel on the side. Water can be watched from outside through clear observation tubes. The unit is installed as a single piece on top of the tank the water is drawn from and returned to.
Every component in its place
Open the cabinet and you see the pumps, filter, UV filter, O2 bubble box, ozone generator, A/B fertiliser and pH dosing pumps, EC/pH sensors and the clear observation tubes. Components are laid out for easy service and maintenance.
From pump to filter, from filter to UV
Water drawn from the tank passes through the pump and rises. With the line 1 valve open, the water goes first through the filter, then through the UV filter.
O2 bubble line
When the line 2 valve opens, water passes through the O2 bubble box and is enriched with oxygen. The oxygenated water shows up with its bubbles in the left clear tube. While one valve is open, the other is closed.
EC, pH and fertiliser dosing
Water leaving the UV filter passes straight through the EC and pH sensors. A/B fertiliser and pH dosing follow the readings. You can see the fertiliser mixing into the water in the right clear tube.
Valves and control panel
After the pumps, each of the two lines starts with a valve: when line 1 is open line 2 is closed, and when line 2 is open line 1 is closed. The control panel and touchscreen manage the valves, EC/pH measurement and dosing.
Tank to tank, two lines
Water from the right and left clear tubes joins at the top and returns to the tank.
Let’s plan your water management together
Talk to our team about your facility, irrigation lines and nutrient recipes.